Pedrini Multiwire Jupiter GS240 Fourth-Generation Multiwire Saw
The Pedrini Jupiter GS240 is an Italian multi-wire saw for High-precision industrial slab cutting of quartzite, marble and granite blocks, with 2200mm, L 11900 mm; H 6900 mm.
Jupiter GS240 Seven-Dimension Rating
Ratings are based on official specifications, third-party field tests and engineer interviews, covering efficiency, accuracy, wire-break control, material compatibility, intelligence, energy saving and labor dependency.
Jupiter GS240 Specs & Parameters
| Parameter | Value |
|---|---|
| Control System | CNC graphical interface |
| Work Envelope | 2200mm |
| Dimensions | machine length 11900 mm; machine height 6900 mm |
| Reference Price Range | Reference price on request |
Jupiter GS240 Editorial Review
Product Positioning: Industrial Multi-Wire Cutting from Pedrini
The Pedrini Jupiter GS240 is a multi-wire saw for industrial slab cutting of granite, marble and other hard stones.
Unlike single-wire squaring or CNC profiling saws, its main advantage is running multiple diamond wires simultaneously, producing several slabs in one pass and significantly improving yield.
Key Specs
Main motor power is Not published; wire speed range is Not published. The combination determines material removal capacity and diamond-wire life when cutting with multiple wires.
Cutting depth/work envelope is 2200mm and machine weight is Not published, so stable foundations and adequate floor space are required. The control system is CNC graphical interface; a friendly interface directly affects wire change, alignment and daily maintenance efficiency.
Cutting Performance and Material Compatibility
Seven-dimension scores: efficiency 7.8, accuracy 7.8, wire-break control 7.5 and material compatibility 7.2.
The key challenge for multi-wire saws is maintaining consistent tension and synchronized feed across all wires. With proper tensioning, they keep wire-break rates low even on hard granite; uneven tension can cause thickness variation or edge chipping.
Who It Suits: High-Volume Slab Processors
The Jupiter GS240 suits stone factories with large annual output, relatively uniform block sizes and high demands on slab-thickness consistency.
For plants focused on export slabs or engineering orders, the high yield and continuous running of a multi-wire saw are key to lowering per-piece cost. If you handle many varieties in small batches, a single-wire or CNC profiling machine may be more flexible.
Four Pre-Purchase Reminders
- Confirm wire count and slab-thickness configuration: verify with the Pedrini distributor that the Jupiter GS240 matches your order mix.
- Request a full technical datasheet: official sites often publish only geometric parameters; power, wire speed and tension force need formal documentation.
- Evaluate foundation and installation: machine weight and dimensions determine civil-work cost; plan overhead crane, water, electricity and compressed-air interfaces in advance.
- Confirm spare parts and service network: for imported brands, check local stock and engineer response times.
Jupiter GS240 Pros & Cons
Pros
- Fourth-generation multiwire with improved structural rigidity and optimized geometry
- 2.3 m large flywheel provides greater wrap angle and smooth traction
- Full 4.3–7.3 mm wire range covers marble, granite and quartzite
- 4.3 mm thin wire optimizes yield to 39.2 m²/m³, reducing waste and energy
Cons
- Official site does not publish power, wire speed, machine weight, or cutting precision
- Does not cover 12 mm ultra-thin slabs (handled by GS230 TECH12)
- Premium imported equipment with high purchase and operating costs
Jupiter GS240 Comparison
Compare Jupiter GS240 with other models in the same category to help you choose based on application and budget.
| Dimension | Jupiter GS240 This Model |
vs | Jupiter GS230-MF |
|---|---|---|---|
|
Power
Main motor power
|
Not disclosedBaseline
|
vs |
Not disclosed
|
|
Wire Speed
Wire speed / bead diameter
|
Not disclosedBaseline
|
vs |
Not disclosed
|
|
Work Envelope
Maximum work envelope
|
2200mmBaseline
|
vs |
2100mmWorse
|
|
Precision
Industrial tolerance control
|
Not disclosedBaseline
|
vs |
Not disclosed
|
|
Axes
Number of interpolated axes
|
Not disclosedBaseline
|
vs |
Not disclosed
|
|
Weight
Machine weight
|
Not disclosedBaseline
|
vs |
Approx. 30000 kg
|
|
Dimensions
Length × width × height
|
machine length 11900 mm; machine height 6900 mmBaseline
|
vs |
machine length 11900 mm; machine height 6900 mmEqual
|
|
Control
CNC system and software
|
CNC graphical interfaceBaseline
|
vs |
CNC graphical interface
|
About Pedrini
Pedrini is an Italian manufacturer of stone processing equipment founded in 1962 and headquartered in Carobbio degli Angeli, Bergamo. With 30,000 m² of production facilities and 120 employees, Pedrini covers the full natural stone process from cutting, polishing, and resining to finishing. Its wire-saw lineup is represented by the Jupiter series, including the single/dual-wire squaring machine GS210, the marble-focused GS230-MF, the granite-focused GS230-GF, the thin-slab multiwire GS230 TECH12, and the fourth-generation GS240, widely used for block squaring and industrial slab cutting of marble, granite, and quartzite.
Jupiter GS240 Buyer FAQ
The Jupiter GS240 is mainly for industrial slab cutting of granite, marble and other hard stones. Multi-wire configuration suits high-volume, relatively uniform block sizes.
For very hard or unusually textured stone, request case studies of the same material from the distributor to confirm wire speed and feed strategy.
Multi-wire saws run several diamond wires at once, producing multiple slabs per pass for higher output. Single-wire squaring saws are better for block squaring and small-batch, multi-variety work.
Choose based on your order mix: high-volume slabs favor multi-wire; complex shapes or small batches favor single-wire or CNC profiling.
European and some international brands often publish only key geometric parameters and configuration highlights, leaving power, wire speed and tension details to sales teams or formal datasheets.
Request the full datasheet from the manufacturer or authorized distributor, and ask for recommended process parameters matched to your target stone.
Wire count depends on target slab thickness, block size and output requirements. More wires increase slabs per pass but also raise wire-change and maintenance workload.
Calculate the optimal wire count and diamond-wire specification together with the distributor, based on your main slab thicknesses and annual output.
Imported brands usually have mature designs and long-lived key components, but original parts and engineer services cost more than domestic alternatives. Diamond wire, guide wheels and seals are routine consumables.
Before signing, confirm local spare-part stock, prices of common wear parts and annual maintenance contents to control unexpected downtime costs.
Jupiter GS240 Buying Recommendation
The Pedrini Jupiter GS240 is an well-positioned Italian multi-wire saw with an overall rating of 7.7/10.
It suits High-precision industrial slab cutting of quartzite, marble and granite blocks scenarios, with brand backing and structural maturity as key strengths. However, some core specifications are not fully published, so request a full datasheet from an authorized Pedrini distributor and confirm service coverage, spare-part supply and site-installation conditions. If budget is tight or higher automation is required, evaluate comparable domestic models and CNC options side by side.
Need more selection advice?
Explore the full wire saw rankings and filter by application, budget and brand to find the right machine for your factory.